(I apologize if I'm putting this in the wrong spot.)
I've been feeling lately like I need to share some of my tips for painting as it may help others to become better painters as well.
As the owner of MSD I've done a lot of bases over the past 3 years. And so I've learned some different techniques.
The one I'm going to talk about today is what I call the tracing method.
So for this I opened one of my other base psds, saved it under the new name needed, and then remove all the unnecessary layers.
Step 2 is to take an image to "trace". I use the NASCAR.com paint scheme galleries. So here's the pic I'm going to use:
So what's next is to insert it on a new layer into the scheme's psd/psp and stretch it to somewhat fit the dimensions.
So next is to start the tracing. Using the pen tool, you choose a different color then what's in the scheme. In this case I'm using pink. I do this so that it's easier to see what I've painted over the background image that I'm tracing from.
When you're drawing the lines you wanna leave the fill in part off so that I can see the image underneath (Notice the bottom color box is empty).
Once you've completed the line you can then fill in the inside color:
So now I'm going to show you guys the black:
First we trace around it. Now it doesn't have to be perfect as it'll be under the yellow (pink in pic). But we do the same thing:
So notice I didn't do the black outline. This can be done by duplicating a layer and increasing the width of the line. Now I use Paint Shop Pro 2020 so I don't know how this works in PSD so maybe someone can help explain how to do that.
But I take the pink part and duplicate it and widen it:
I copied the Vector 1 layer. So now I click on the lines on the car so that we're working with the Copy of Vector 1 layer. I think increase the width until I saw no more black (which the triangle points to that, it went from 1 to 12. You'll notice I also change the color to the same color I used as a substitute for the black.
After that I move the copy layer down one so it's underneath the original:
So now I'm going to skip for a moment instead of painting the whole thing first. When you're done with this you can just change the colors of these layers to match the ones that are actually on the scheme.
Now this isn't a foolproof way of doing this. You still have the limitations of the templates. Plus you're still going to have to paint the front yourself as most of the time there's not a good shot to use. But this can at least help you make better lines and get things lined up closer to the real thing then just trying to eyeball it.
And there ya go. That's the tracing method.
I've been feeling lately like I need to share some of my tips for painting as it may help others to become better painters as well.
As the owner of MSD I've done a lot of bases over the past 3 years. And so I've learned some different techniques.
The one I'm going to talk about today is what I call the tracing method.
So for this I opened one of my other base psds, saved it under the new name needed, and then remove all the unnecessary layers.
Step 2 is to take an image to "trace". I use the NASCAR.com paint scheme galleries. So here's the pic I'm going to use:
So what's next is to insert it on a new layer into the scheme's psd/psp and stretch it to somewhat fit the dimensions.
So next is to start the tracing. Using the pen tool, you choose a different color then what's in the scheme. In this case I'm using pink. I do this so that it's easier to see what I've painted over the background image that I'm tracing from.
When you're drawing the lines you wanna leave the fill in part off so that I can see the image underneath (Notice the bottom color box is empty).
Once you've completed the line you can then fill in the inside color:
So now I'm going to show you guys the black:
First we trace around it. Now it doesn't have to be perfect as it'll be under the yellow (pink in pic). But we do the same thing:
So notice I didn't do the black outline. This can be done by duplicating a layer and increasing the width of the line. Now I use Paint Shop Pro 2020 so I don't know how this works in PSD so maybe someone can help explain how to do that.
But I take the pink part and duplicate it and widen it:
I copied the Vector 1 layer. So now I click on the lines on the car so that we're working with the Copy of Vector 1 layer. I think increase the width until I saw no more black (which the triangle points to that, it went from 1 to 12. You'll notice I also change the color to the same color I used as a substitute for the black.
After that I move the copy layer down one so it's underneath the original:
So now I'm going to skip for a moment instead of painting the whole thing first. When you're done with this you can just change the colors of these layers to match the ones that are actually on the scheme.
Now this isn't a foolproof way of doing this. You still have the limitations of the templates. Plus you're still going to have to paint the front yourself as most of the time there's not a good shot to use. But this can at least help you make better lines and get things lined up closer to the real thing then just trying to eyeball it.
And there ya go. That's the tracing method.
Last edited: